Liquid Fresh

Code Zero Body Volume Application Guide

Necessary Materials

• Code Zero Body Volume bottle
• Flexion (L) brush by cliCHair for non-curly hair
• Wide-tooth comb (optional for detangling)
• Hairdryer with diffuser attachment (for curly hair)
• Round brush (for straight or wavy hair)

Preparation

• Wash hair with a gentle shampoo suitable for your hair type.
• Towel dry hair to remove excess water until damp.
• Shake the Body Volume bottle well before use.

Application for Curly Hair

• Dispense an egg-sized amount of Body Volume into your hands.
• Use fingers to evenly distribute the product through damp hair, focusing on areas where volume is desired.
• For defining curls, scrunch hair upwards with your hands and dry using a diffuser.

Application for Non-Curly Hair

• Dispense an egg-sized amount of Body Volume into your hands.
• Distribute the product evenly through damp hair, from roots to ends, using the Flexion (L) brush or a wide-tooth comb.
• To add volume at the roots, lift sections of hair and blow-dry using a round brush, directing the airflow upwards.

Finishing

• Continue drying hair until completely dry.
• For curly hair, gently shake the curls at the root to boost volume without frizz.
• For straight or wavy hair, finish with a cool shot from the dryer to set the style and add shine.
• Optionally, apply a light-hold hairspray for extra hold and definition.

Post-Treatment Advice

• Avoid excessive touching of the hair to maintain volume and definition.
• Use a silk or satin pillowcase to reduce frizz and maintain style overnight.
• For curly hair, consider using a leave-in conditioner or curl cream from the Code Zero Styling range to maintain hydration and definition between washes.
• For non-curly hair, a volumizing spray can be used on the roots for extra lift on the second day.

Code Zero Fusion Gel SPray Application Guide

Necessary Materials:

• Fusion Strong Gel Spray by Code Zero
• Flexion (L) brush by cliCHair
• Hairdryer (optional for heat styling)
• Styling gloves (optional)

Preparation:

• Start by ensuring your hair is clean and slightly damp. If necessary, use a gentle shampoo and blot your hair with a towel to remove excess water.
• Shake the bottle of Fusion Strong Gel Spray by Code Zero well before use to ensure the ingredients are well mixed.

Application:

• Evenly spray Fusion Strong Gel Spray onto damp hair, holding the bottle about 15-20 cm away. Focus on the roots and proceed towards the lengths, avoiding over-application.
• Use the Flexion (L) brush by cliCHair to distribute the gel spray evenly. The boar and nylon bristles of the brush are ideal for spreading natural oils along the hair, nourishing it, and gently removing knots. This step also reduces breakage and prepares the hair for styling, ensuring a smooth, frizz-free base.
• If you want to create volume, use a hairdryer while lifting the roots with the Flexion (L) brush, taking advantage of its flexible structure and ionic properties to minimize frizz and reduce drying time.

Finishing:

• Once styling is complete, whether you've used a hairdryer or allowed your hair to air dry, use the Flexion (L) brush by cliCHair again to give your look the final touch. This will not only help ensure your style is knot-free and smooth but also that your hair is shiny and evenly distributed with its natural oils.
• There is no need to rinse out Fusion Strong Gel Spray by Code Zero, as it is formulated to provide lasting protection and maintain your hair's styling throughout the day.

Post-Treatment Advice:

• Use the Flexion (L) brush daily to keep your hair smooth, distribute natural oils, and ensure easy combing and impeccable hair.
• To preserve the health of your hair, limit washing to when strictly necessary, and complete your routine with finishing products like Body Volume Spray to add further volume and shine.
• When it's time to remove the product, opt for a purifying shampoo for a deep clean.

Code Zero Fixxit Extra Strong Gel Application Guide

Materials Required:

• Code Zero's Fixxit Extra Strong Styling Gel

Preparation:

• Start with clean, slightly damp hair to facilitate the application of the gel.
• Dry your hair with a towel to remove excess moisture.
• Use your fingers to detangle your hair and prepare it for product application.

Application:

• Take a small amount of Code Zero's Fixxit Extra Strong Styling Gel on your fingers.
• Rub the gel between your hands to warm it up, helping to activate the ingredients.
• Evenly distribute the gel throughout your hair, from roots to ends, making sure to cover areas that require more hold.
• Shape your hair with your fingers to create the desired look.
• Allow to air dry to set the styling.

Finishing:

• Once your hair is dry, you can use your hands to further adjust your style or add volume where needed.
• If you want more definition or texture, apply an additional small amount of Fixxit Gel and work it in with your fingers.

Post-Treatment Tips:

• To maintain the style, try not to touch your hair too much throughout the day.
• For a quick touch-up, use a small amount of gel on dry hair and reshape with your hands.
• Wash your hair with a gentle shampoo to remove the product when you want to change your look or simply to nourish your hair.

Code Zero Liquid Fresh Wetlook Gel Application Guide

Materials Required:

• Code Zero's Liquid Fresh Wetlook Gel
• Towel

Preparation:

• Start by washing your hair with a gentle shampoo to remove impurities and residues from previous products.
• Towel-dry your hair until it's damp, not completely wet.

Application:

• Dispense a small amount of Liquid Fresh Wetlook Gel onto the palm of your hand.
• Rub the gel between your hands to slightly warm it up and activate the formula.
• Apply the gel evenly to your hair, from roots to ends, on either damp or dry hair, depending on the desired effect.
• Use your hands to style your hair into the fresh, youthful look you prefer. Liquid Fresh is perfect for defining a personalized style that reflects your uniqueness.
• Let your hair air dry to maintain the wet effect and achieve a strong hold without weighing it down.

Finishing:

• Once dry, if necessary, reapply a small amount of gel to further define the look or add details.
• Liquid Fresh ensures a flawless look all day long without the need for rinsing or touch-ups.

Post-Treatment Tips:

• To maintain the style, avoid excessively wetting or combing your hair until the next wash.
• Use a gentle shampoo during the next wash to remove the gel.

Code Zero Salt & Sand Application Guide

Required Materials:

• Bottle of Salt & Sand
• Wide-tooth comb
• Hairdryer (optional)
• Diffuser (optional for curly hair)

Preparation:

• Shake the bottle of Salt & Sand well before use to mix the ingredients.
• Ensure hair is damp but not completely wet. If starting with dry hair, lightly moisten with water.

Application:

• Spray Salt & Sand evenly on damp hair, keeping the bottle about 15-20 cm away.
• To add volume at the roots, lift sections of hair and apply the product directly to the scalp, massaging lightly with fingertips.
• Use a wide-tooth comb to distribute the product evenly through the hair.
• For natural waves, lightly twist hair strands with your fingers as you air-dry or use a diffuser on low heat.

Finishing:

• Once hair is dry, if you wish to further define waves or styling, use Flexion (L) to add texture and hold.
• Do not rinse, to maintain the natural beach effect.
• If used, adjust the volume and shape with your hands or with the help of a wide-tooth comb for a more natural finish.

Post-Treatment Tips:

• To maintain the beach effect and texture in the following days, apply a small amount of Salt & Sand to your hands, rub them together, and then run your fingers through your hair.
• Avoid using hard brushes that can weigh down the hair and reduce the product's effect.
• For an instant refresh, lightly moisten the hair and reapply Salt & Sand as needed.

Code Zero Finish UP Application Guide

Required Materials:

• Finish UP medium by Code Zero
• Finish UP intense by Code Zero
• cliCHair's Flexion (L) brush for impeccable finishing
• Wide-tooth comb for detangling
• Hairdryer and diffuser (if planning to dry or style with heat)

Preparation:

• Start with clean and damp hair, previously washed with a product suitable for the hair type. This ensures the hair is in the optimal condition for styling with Finish UP.
• Use the wide-tooth comb to remove knots and prepare the hair for product application, ensuring the product is evenly distributed.

Application:

• For Finish UP medium (Ideal for medium hold and natural looks):

  • Shake the bottle well to mix the formula.
  • Hold the can about 20-30 cm from the hair and spray evenly throughout, focusing on lengths and ends to avoid weighing down the roots.
  • Work the hair with fingers or a comb to create the desired look. For natural volume and soft looks, lift the strands while spraying.
  • Allow to air dry or proceed with cold blow-drying to set the look.

• For Finish UP intense (For strong hold and defined styling):

  • Just like with medium, shake the can and spray the hair from a distance of 20-30 cm.
  • Focus this time on roots or sections that require more support and hold.
  • Use a hairdryer and diffuser to dry the hair, shaping as desired. This will enhance the hold and further define the styling.
  • For extremely precise finishes, style with the Flexion (L) brush after drying.

Finishing:

• For both products, once the desired styling is achieved, use the Flexion (L) brush to perfect the look. The mixed bristles will help distribute natural oils, adding shine and reducing frizz.
• If necessary, apply a light additional layer of Finish UP medium or intense to further secure the styling.

Post-Treatment Tips:

• To maintain the styling result, avoid moisture and water for 24 hours after application.
• Use the Flexion (L) brush in the following days for gentle and effective styling maintenance, helping to keep hair smooth and frizz-free.