Nika Grace Colors Application Guide

Materials Required:

• Grace Color cream
• Activator (20 or 30 Volumes, depending on the desired result)
• Adequate gloves
• Mixing bowl and brush
• Timer
• Shampoo and conditioner suitable for colored hair

Preparation:

1. Wear the appropriate gloves to protect your skin.
2. Measure 60 ml of Grace Color cream and mix it with 90 ml of Activator in a mixing bowl. Follow a 1:1.5 ratio for optimal results.
3. Stir the mixture until it's smooth and consistent, ensuring no lumps remain.

Application:

• For roots touch-up:
  1. Divide the hair into four sections to ensure even application.
  2. Begin applying the mixture to the roots with the brush, thoroughly covering new growth.
  3. Leave the mixture on the roots for the initial 30 minutes.
• For lengths and ends refreshment:
  1. After the first 30 minutes, dampen the hair slightly with water.
  2. Emulsify the color from the roots through to the lengths and ends to ensure even coverage and refreshment of the color.
  3. Leave the mixture on for an additional 5-10 minutes, based on the desired intensity and tone.

Finishing:

1. After the total processing time, rinse the hair thoroughly with lukewarm water until it runs clear.
2. Use a shampoo specifically designed for colored hair to help remove any remaining color mixture and begin the sealing process of the hair cuticle.
3. Apply a conditioner or a color-sealing mask to moisturize and further seal the cuticle, enhancing the shine and longevity of the color.
4. Gently towel-dry and style as usual.

Post-Treatment Tips:

• Avoid washing your hair for 48 hours after the coloring process to ensure the color fully sets.
• Use color-protecting shampoo and conditioner to maintain the vibrancy and health of your colored hair.
• Limit the use of hot tools and always use a heat protectant spray to prevent color fading.
• Consider using a color-refreshing conditioner or mask once a week to boost the color's intensity and shine.

Nika Grace Natural Hair Application Guide

Materials Needed:

• Gloves
• Grace Color cream
• Activator (5/10/20/30/40 Volumes)
• Mixing bowl and brush
• Timer
• Shampoo and conditioner for color-treated hair

Preparation:

• Mixing Ratio: Follow a 1:1.5 ratio, mixing 60 ml of Grace Color cream with 90 ml of Activator.
• Glove Up: Wear suitable gloves to protect your hands throughout the process.
• Hair Prep: Ensure hair is dry and has not been washed immediately prior to application.

Application:

• Initial Application on Natural Hair:
  • Start by applying the mixture to the lengths and ends of the hair. Avoid the roots at this stage.
  • Processing Time: Leave the product in for 15 minutes.
  • After 15 minutes, apply the mixture to the roots, ensuring full coverage.
  • Total Processing Time: Allow the product to develop for an additional 30 minutes on the roots, lengths, and ends.

Finishing:

• Rinse: After the processing time, thoroughly rinse the hair with lukewarm water until the water runs clear.
• Shampoo and Condition: Use a shampoo and conditioner specifically designed for color-treated hair to help seal in the color and ensure long-lasting results.

Post-Treatment Tips:

• Color Maintenance: To maintain vibrant color, use color-protecting shampoo and conditioner.
• Heat Styling: Limit the use of heat styling tools and when necessary, use a heat protectant to prevent color fading.
• Touch-Ups: Schedule touch-ups every 4-6 weeks to maintain color uniformity and cover new growth.

Nika Grace Colors Pre & Repigmentation Guide

Materials Needed:

• Protective gloves
• Grace Color cream by Nika
• Activator 10 vol (3%)
• Mixing bowl and brush
• Timer
• Shampoo and conditioner for colored hair

Preparation:

1. Wear protective gloves to avoid staining your hands.
2. In a mixing bowl, combine Grace Color cream with Activator in a 1:1.5 ratio. For every 60 ml of Grace Color cream, mix in 90 ml of Activator.
3. Stir the mixture until it achieves a uniform consistency.

Application for Pre-Pigmentation:

1. Apply the mix to dry, unwashed hair starting from the areas that are most faded or have lost most color.
2. Use a brush for precise application, ensuring all strands are evenly coated.
3. Allow the color to develop for 20 minutes for optimal pre-pigmentation effect.

Application for Re-Pigmentation:

1. Follow the same steps as pre-pigmentation, applying evenly across all hair.
2. For re-pigmentation, focus on areas previously lightened or where color has faded significantly, leave the product in for 15-20 minutes.

Finishing:

1. After the development time, emulsify the product by adding a small amount of water and gently massaging the hair and scalp.
2. Rinse the hair thoroughly until the water runs clear.
3. Wash the hair with a shampoo suitable for colored hair, then apply a conditioner, leaving it on for a few minutes to add moisture and shine back into the hair.

Post-Treatment Tips:

• Avoid washing your hair for at least 48 hours after the treatment to allow the color to set.
• Use color-safe shampoo and conditioner to maintain the vibrancy of the color.
• Regularly use a hair mask or deep conditioning treatment to keep hair healthy and prevent color fade.

Nika Grace Color High-Lift Application Guide

Materials Needed:

• Nika Grace Color High-Lift Lightener of choice
• Nika Grace Activator (30 or 40 vol, depending on the desired lift)
• Non-metallic mixing bowl
• Hair color brush
• Gloves
• Timer
• Hair clips for sectioning
• Plastic cap (optional)

Preparation:

• Wear suitable gloves to protect your hands.
• Do not wash hair before application; it should be dry and unwashed.
• Mix the High-Lift Lightener with the Nika Grace Activator in a 1:2 ratio. For example, mix 60 ml of the High-Lift Lightener with 120 ml of the Nika Grace Activator.
  • For 5 levels of lift on base levels 6/7, use 30 vol (9%) Activator.
  • For 5 levels of lift on base levels 5/6, use 40 vol (12%) Activator.

Application:

• Start by dividing the hair into four sections using hair clips for better control.
• Begin application at the back of the head, moving towards the front, to ensure an even lightening effect.
• Apply the mixture to the hair strands, avoiding the scalp, starting 1 cm away from the roots if you are looking for an even lightening from root to tip.
• Ensure that all strands are evenly saturated with the mixture for uniform results.
• Leave the mixture on for up to 60 minutes, checking periodically for the desired level of lightness.
  • Do not exceed 60 minutes of processing time.

Finishing:

• Once the desired lift is achieved, thoroughly rinse the hair with warm water.
• Shampoo gently with a color-safe shampoo to remove any remaining product.
• Apply a deep conditioning treatment designed for color-treated or lightened hair to replenish moisture and help restore hair's natural pH balance.
• Rinse out the conditioner thoroughly and style as desired.

Post-Treatment Advice:

• Avoid washing your hair for at least 48 hours after the treatment to allow the color to set.
• Use a sulfate-free shampoo and conditioner designed for color-treated hair to maintain the brightness and integrity of the blonde tones.
• Regular deep conditioning treatments are recommended to keep the hair hydrated and healthy.
• Limit the use of hot styling tools to prevent further damage to lightened hair. If using, apply a heat protectant product beforehand.
• Consider using a toner or purple shampoo periodically to maintain the desired blonde shade and counteract any brassy tones.

Nika Grace Colors Toning Application Guide

Materials Required:

• Grace Color toning shade
• Activator (5 vol or 10 vol)
• Non-metallic mixing bowl
• Hair coloring brush
• Gloves
• Timer
• Shampoo and conditioner suitable for colored hair

Preparation:

• Mix Grace Color toning shade with the activator in a 1:2 ratio. For example, blend 60 ml of the toning shade with 120 ml of Activator.
• Ensure gloves are worn to protect your hands from staining.
• Start with hair washed and lightly towel-dried to remove excess water.

Application:

• Apply the mixture to the hair using the coloring brush, starting from the areas that need the most correction or where the desired tonal effect is strongest.
• Use sectioning clips to divide the hair into manageable sections for even application.
• Once all hair is covered, comb through gently to ensure even distribution of the product.
• Leave the mixture on the hair to process 'at sight', which typically means checking the color development every 5-10 minutes. The total processing time should not exceed the recommended duration based on the desired tonal intensity.

Finishing:

• Once the desired tone is achieved, rinse the hair thoroughly with lukewarm water until the water runs clear.
• Shampoo the hair gently with a shampoo formulated for colored hair to help remove any residual color mixture.
• Apply a conditioner suitable for colored hair, leave it on for a few minutes, then rinse thoroughly to add moisture and shine to the toned hair.

Post-Treatment Tips:

• Avoid washing your hair for at least 48 hours after the toning treatment to allow the color to set.
• Use color-protecting hair care products to maintain the tone and vibrancy of the color.
• Limit exposure to sun, chlorine, and salt water, as these can fade the color and affect the tonal quality.
• Schedule regular touch-up sessions to maintain the desired tone, depending on the hair growth and color fade.

Stabilizer pH 3.5 Application Guide

Required Materials:

• Stabilizer pH 3.5 Spray
• Towel
• Wide-tooth comb
• Hairdryer (optional)
• Flexion (L) (optional)

Preparation:

• No specific mixing ratios are required for Stabilizer pH 3.5, as it is used in its original form.
• Ensure the hair has been washed and treated because Stabilizer is to be used as the last step.

Application:

• Conclude any ongoing technical or healing treatment.
• Rinse the hair to remove any product residue.
• Dab the hair with a towel to remove excess water.
• Hold the Stabilizer at a distance of 20-30 cm from the hair and spray evenly on lengths and ends.
• Comb with a wide-tooth comb for an even distribution of the product.
• No waiting time is necessary; Stabilizer acts immediately.

Finishing:

• Continue with natural hair drying or use a hairdryer, according to preference.
• For optimal results, complete styling with Flexion to add definition and Focus for intense shine and to avoid stressing the hair.

Post-treatment Tips:

• Avoid the use of aggressive products that can alter the hair's pH.