THIS IS

ECOVEXX

Swiss innovation for a revolution in hair care, free from parabens, silicones, sulfates, and gluten. Designed in Swiss laboratories, this advanced hair care system is the solution for those looking to protect and rebuild hair during chemical treatments such as coloring and bleaching. At the heart of ECOVEXX is a synergy of selected 10 amino acids, pomegranate seed oil, yeast extract, and blueberry extract, delivered deep into the hair by the Niosome technology. These powerful natural ingredients work in harmony to nourish, hydrate, and strengthen the hair, offering a definitive solution against weakness and breakage. Choosing ECOVEXX means relying on Swiss precision to transform your hair beauty routine.

Buy

M.A.B.C.

multi action bonds creator

Discover the ECOVEXX Multi Action Bonds Creator (M.A.B.C.), a Swiss-engineered hair care revolution. Featuring a powerful combination of 10 amino acids, pomegranate seed oil, yeast extract, and blueberry extract, delivered through the advanced Niosome system, M.A.B.C. deeply rejuvenates the hair's structure. This innovative formula, Xsence N°1, specifically targets and repairs damaged keratin fibers, promoting hair resilience, elasticity, and hydration. Embrace the transformation towards stronger, more vibrant hair with ECOVEXX's synergy of nature and science.

Buy

ACTIVE

INGREDIENTS

Dive into nature with ECOVEXX, where active ingredients come together for a revolutionary hair care experience. Pomegranate Seed Oil: Rich in punicic acid, this ingredient acts as a powerful antioxidant, offering deep hydration and anti-aging benefits, leaving hair soft, elastic, and vibrant. Yeast Extract: Loaded with vitamins, proteins, and amino acids, it helps to densify and rebuild the hair fiber, enriching the hair from the roots. Blueberry Extract: Provides an extra dose of hydration and antioxidant protection, directly addressing issues of dryness and fragility. With ECOVEXX, transform your hair into a strong, elastic, and luminous mane, thanks to a formula inspired and supported by the power of nature.

THE ECOVEXX

COMPLEX

Experience the transformation with The ECOVEXX Complex, a harmonious fusion of nature and science for your hair. Phase 1: Xsence N°1 is a revolutionary solution designed to be mixed with your chosen chemical hair treatment. It strengthens and creates new keratin bonds, protecting the hair's internal structure while densifying and rebuilding the hair fiber, infusing it with renewed strength and elasticity, without altering the development times, usage methods, or results of the used chemical products. Phase 2: Xsaver N°2, a post-treatment cream, seals the bonds formed by Xsence N°1. It further nourishes and hydrates the hair, leaving it soft and silky. This two-step process is the essence of ECOVEXX, solving the problem of hair damage by offering deep repair and protection, ensuring your hair remains vibrant and resilient through any treatment.

Instruction for Use

with Colors

ECOVEXX for Hair Color Application Guide

Materials Needed:

  • Ecovexx Xsence N°1
  • Hair coloring cream and peroxide (developer)
  • Measuring cup
  • Mixing bowl and brush
  • Gloves
  • Timer
  • Code Zero Start Kit Duo (if available)
  • Flexion (L) brush by cliCHair for finishing

Preparation:

  • Mix hair coloring cream with the required amount of peroxide as usual.
  • Add 1 ml of Xsence N°1 for every 10 gr of hair coloring cream using the measuring cup provided.
  • Example: For 60 ml of hair coloring cream + 60 ml of peroxide, add 6 ml of Xsence N°1.

Application:

  • Apply the hair color mixture to the hair, using sectioning techniques to ensure even coverage.
  • Work the color through the hair as usual.
  • Rinse thoroughly after the recommended development time and shampoo the hair.

Finishing:

  • Apply Xsaver N°2 evenly across the hair, ensuring the necessary amount is used according to the hair's length.
  • Leave on for at least 5 minutes.
  • Rinse thoroughly and style as desired.
  • Use the Flexion (L) brush to gently detangle and smooth the hair for a polished finish.

Post-Treatment Advice:

  • Recommend not washing the hair for at least 48 hours to prolong the color.
  • Suggest using Code Zero Focus shampoo and conditioner to maintain color vibrancy.

with Bleaching Powder

ECOVEXX for Bleaching powder Application Guide

Materials Needed:

  • Bleaching Powder
  • Peroxide (appropriate volume)
  • Ecovexx Xsence N°1
  • Mixing bowl and brush
  • Measuring cup
  • Gloves
  • Timer
  • Xsaver N°2
  • Flexion (L) brush

Preparation:

  • Mix the bleaching powder with the required amount of peroxide according to standard practice.
  • Incorporate 2 ml of Xsence N°1 for every 10 grams of bleaching powder used.
  • Combine until the mixture is smooth and free of lumps.

Application:

  • Apply the blend to dry, unwashed hair, starting at the back and progressing towards the front. Take care to avoid direct scalp application for non-scalp bleaches.
  • Partition hair using sectioning clips to ensure even coverage.
  • Regularly check the hair at intervals of 5-10 minutes to monitor the lifting process.
  • Adhere to the maximum processing time as recommended.

Finishing:

  • Upon reaching the desired lift, thoroughly rinse hair with tepid water.
  • Gently shampoo to cleanse out all traces of the bleaching agent.
  • Towel-dry hair and distribute Xsaver N°2 evenly, leaving it on for a minimum of 5 minutes.
  • Rinse off thoroughly and apply a nourishing deep conditioner if necessary.
  • Detangle and smooth the hair using the Flexion (L) brush.

Post-Treatment Advice:

  • Suggest avoiding hot water for hair washes in the following 48 hours.
  • Recommend the Code Zero Focus product line for ongoing hair care.
  • Advise minimal use of heat styling tools to prevent additional hair stress.

with Superbleachings

ECOVEXX for Superbleachings Application Guide

Materials Needed:

  • Superbleaching hair color cream
  • Peroxide (developer)
  • Ecovexx Xsence N°1
  • Mixing bowl and applicator brush
  • Measuring cup
  • Gloves
  • Timer
  • Ecovexx Xsaver N°2
  • Flexion (L) brush by cliCHair

Preparation:

  • Mix the superbleaching hair color cream with the required amount of peroxide following the standard ratio.
  • Add 7.5 ml of Ecovexx Xsence N°1 to every 50 gr of superbleaching hair color cream.
  • Use the provided measuring cup for accuracy.

Application:

  • Apply the mixture evenly to the hair, working section by section to ensure full coverage.
  • Leave the mixture on the hair according to the manufacturer’s instructions, checking frequently to achieve the desired level of lift.

Finishing:

  • Rinse the hair thoroughly with lukewarm water once the desired lightness is achieved.
  • Shampoo the hair to remove all traces of the bleaching cream.
  • Towel-dry the hair and apply Ecovexx Xsaver N°2 evenly, leave it on for a minimum of 5 minutes.
  • Rinse out Xsaver N°2 thoroughly.
  • Use the Flexion (L) brush for a gentle detangling and smoothing finish.

Post-Treatment Advice:

  • Advise clients to use a sulfate-free shampoo and conditioner like Code Zero Focus to maintain hair health and color.
  • Suggest avoiding heat styling for a few days to allow the hair to recover.

as Revitalizing Treatment

ECOVEXX for Revitalizing Treatment Application Guide

Materials Needed:

  • Ecovexx Xsence N°1
  • Ecovexx Xsaver N°2
  • Measuring cup
  • Timer
  • Hair clips for sectioning
  • Flexion (L) brush
  • Hairdryer or steamer (optional for heat application)
  • Shampoo and conditioner

Preparation:

  • Measure out 10 ml of Xsence N°1 and 15 ml of Xsaver N°2 using the provided measuring cup.
  • Mix the Xsence N°1 and Xsaver N°2 in a bowl until well combined.

Application:

  • Start by shampooing the hair and towel-drying to remove excess moisture.
  • Apply the Xsence N°1 and Xsaver N°2 mixture to the hair, from roots to ends.
  • Use sectioning clips to divide the hair and ensure the mixture is evenly distributed.
  • If available, apply gentle heat using a hairdryer or place under a steamer for 15 minutes to enhance penetration.

Finishing:

  • After the processing time, rinse the hair thoroughly with lukewarm water.
  • Apply a nourishing conditioner or mask, leave for a few minutes, then rinse again.
  • Gently towel-dry the hair and detangle with the Flexion (L) brush.

Post-Treatment Advice:

  • Advise the client to avoid heat styling immediately after the treatment to prevent stress on the hair.
  • Recommend using the Code Zero Focus range for home maintenance to prolong the treatment effects.

with Chemical Straighteners

ECOVEXX for Chemical Straighteners Application Guide

Materials Needed:

  • Code Zero Ecovexx Xsence N°1
  • Chemical straightening cream
  • Mixing bowl
  • Measuring cup
  • Application brush
  • Gloves
  • Timer
  • Code Zero Xsaver N°2
  • Flexion (L) brush for finishing
  • Neutralizing solution
  • Shampoo and conditioner

Preparation:

  • Mix 10 ml of Ecovexx Xsence N°1 with every 50 ml of chemical straightening cream using the measuring cup.
  • Stir the mixture until it's smooth and homogenous.

Application:

  • Apply the mixture evenly to the hair, section by section, starting from the nape and moving towards the forehead.
  • Ensure that the product is evenly distributed and that every strand is coated.
  • Leave the mixture on the hair for the recommended time according to the hair texture and condition, typically around 20 minutes, but always refer to the straightening cream instructions.

Finishing:

  • Rinse the hair thoroughly with lukewarm water until all the product is removed.
  • Apply the neutralizing solution as per the instructions to halt the straightening process.
  • Once the neutralization is complete, rinse again with lukewarm water.
  • Shampoo and condition the hair.
  • Gently detangle the hair with the Flexion (L) brush, ensuring smoothness and preventing any stress on the freshly straightened hair.

Post-Treatment Advice:

  • Advise clients to avoid washing the hair for at least 48 hours to ensure the longevity of the straightening effect.
  • Recommend a sulfate-free shampoo and conditioner for maintenance, such as the Code Zero Focus range.

with Keratin Straighteners

ECOVEXX for Keratin Straighteners Application Guide

Materials Needed:

  • Code Zero Ecovexx Xsence N°1
  • Keratin straightening cream
  • Mixing bowl and application brush
  • Gloves and timer
  • Code Zero Xsaver N°2 for post-treatment
  • Flexion (L) brush by cliCHair
  • Shampoo and conditioner suitable for keratin-treated hair

Preparation:

  • Start by shampooing the hair with a clarifying shampoo to remove any residues and open the hair cuticles.
  • Mix 1 ml of Ecovexx Xsence N°1 with every 10 ml of keratin straightening cream in the mixing bowl.
  • Ensure the client's hair is towel-dried but still slightly damp before application.

Application:

  • Divide the hair into sections and apply the keratin mixture evenly with the application brush, starting from the roots to the ends, but avoid applying directly to the scalp.
  • Comb through each section with a fine-toothed comb to ensure even distribution.
  • Allow the product to sit on the hair for the recommended time, typically around 20-30 minutes, depending on the hair's condition and the manufacturer's instructions.

Finishing:

  • After the processing time, lightly rinse the hair with warm water, removing any excess product without completely washing it out.
  • Apply Code Zero Xsaver N°2, leaving it on for at least 5 minutes to lock in the keratin.
  • Rinse the hair again and blow-dry using a round brush to smooth out the hair.
  • Use a flat iron at the recommended temperature to seal in the keratin treatment.
  • Detangle and give the final touch with the Flexion (L) brush for a sleek finish.

Post-Treatment Advice:

  • Recommend not washing the hair or tying it up for at least 48 hours to allow the keratin to set properly.
  • Suggest using sulfate-free shampoo and conditioner to extend the life of the treatment.
  • Advise minimal use of heat styling tools to maintain hair health.

with Perms

ECOVEXX for Perms Application Guide

Materials Needed:

  • Perm lotion suitable for the client's hair type
  • Ecovexx Xsence N°1
  • Neutralizer
  • Perm rods of desired size
  • Plastic cap
  • Timer
  • Gloves
  • Code Zero Xsaver N°2
  • Flexion (L) brush by cliCHair
  • Shampoo and conditioner

Preparation:

  • Perform a strand test to determine the necessary processing time for the perm lotion.
  • Wash the hair with a gentle shampoo to ensure it's clean and free of residues.
  • Towel dry the hair to remove excess moisture.
  • Apply 25-30 ml of Ecovexx Xsence N°1 evenly throughout the hair, depending on the length, to prepare it for the perm process.

Application:

  • Section the hair for easy management and begin wrapping sections around perm rods, starting from the nape of the neck moving upwards.
  • After wrapping, apply the perm lotion thoroughly over the rods, ensuring even coverage.
  • Cover with a plastic cap to enhance processing.
  • Leave the perm lotion on as determined by the earlier strand test.

Finishing:

  • Gently remove the plastic cap and rinse the hair with warm water for at least 5 minutes without removing the rods, ensuring all perm lotion is washed out.
  • Apply the neutralizer to each rod, adhering to the time specified by the product.
  • Carefully remove the perm rods and apply the neutralizer again if required by the product instructions, then rinse thoroughly.
  • Apply Code Zero Xsaver N°2 to nourish and stabilize the hair, leave for 5 minutes, then rinse.

Post-Treatment Advice:

  • Advise against washing or heat styling the hair for 48 hours after the perm to allow the curls to set properly.
  • Suggest using sulfate-free shampoo and conditioner to maintain the curls and hydration.
  • Recommend gentle detangling and styling with the Flexion (L) brush to preserve the curls' integrity.